Simrad GC80 User Manual

Simrad GC80/GC85 Dual Gyro Compass
28 20221537 / D
Buzzer silence only
By installing an external acknowledging switch, it is possible to
silence the buzzer while the alarm code remains in the display.
Install the switch to the control unit according to the Wiring
diagram on page Error! Bookmark not defined. onwards.
Note! Could only be used if no pendulum switch is installed!

Simrad GC80 Specifications

General

Type	Gyro Compass
Power Supply	24 V DC
Operating Temperature	-15°C to +55°C
Heading Resolution	0.01°
Heading Repeatability	±0.1°
IP Rating	IP66
Storage Temperature	+70°C
Interfaces	NMEA 0183
Humidity	95% non-condensing