Simrad GC80 User Manual

TECHNICAL SPECIFICATION
20221537 / D 79
STEP signal
Circuits:.....................................................................4
Electrical: ...................................... 24V DC – 6 step/°
RATE OF TURN signal
Circuits......................................................................1
Electrical: ........................ +/-10V (+/-120°) (default),
+/-10V (+/-30°),
+/-10V (+/-300°),
+/-5V (+/-120°),
+/-5V (+/-300°),
+/-5V (+/-30°)
Note! Refer Rate of Turn scale dip switch settings, page
106, and to
the separate manual delivered for Rate of Turn Instrument.
Alarm output
Potential free .................................................. NO/NC
Running contact
Potential free .................................................. NO/NC
Refer
Jumper settings on SCC board, page 107.
7.5 Physical Dimensions
GC80/GC85 Master Compass
Height: ................................................................. 438 mm (17.2”)
Width: ..................................................................340 mm (13.4”)
Depth: ..................................................................340 mm (13.4”)
Weight: .................................................................... 23 kg (51lbs)
GC80 Dual Control Unit
Height: ................................................................. 561 mm (22.1”)
Width: ..................................................................467 mm (18.4”)
Depth: ....................................................................182 mm (7.2”)
Weight: ..................................................................... 23kg (51lbs)

Simrad GC80 Specifications

General

Type	Gyro Compass
Power Supply	24 V DC
Operating Temperature	-15°C to +55°C
Heading Resolution	0.01°
Heading Repeatability	±0.1°
IP Rating	IP66
Storage Temperature	+70°C
Interfaces	NMEA 0183
Humidity	95% non-condensing