Simrad GC80 User Manual

Simrad GC80/GC85 Dual Gyro Compass
46 20221537 / D
5 Remove strips and foam rubber from the chock absorbers,
together with all strips used for securing moving parts
during transportation.
Note! The foam rubber should be kept for re-use if the Master compass
has to be sent to factory for service!
5.3 Cabling
Note! No cables are included when the gyro system is delivered from
factory.
The wiring diagram on page Error! Bookmark not defined.
onwards includes cable specification for all cables that have to
be used.
Connect power and signal cables according to the wiring
diagram on page Error! Bookmark not defined. onwards.
To avoid that vibration should cause the cables to loose
connection, the cables could be fastened to the fixing device by
using wire straps as illustrated on the figure.

Simrad GC80 Specifications

General

Type	Gyro Compass
Power Supply	24 V DC
Operating Temperature	-15°C to +55°C
Heading Resolution	0.01°
Heading Repeatability	±0.1°
IP Rating	IP66
Storage Temperature	+70°C
Interfaces	NMEA 0183
Humidity	95% non-condensing