Simrad NSS evo2 - Page 8

D10-D13 LEDs set on the board.
D10 D11 D12 D13 Status Possible
reasons
slightly
glowing
slightly
glowing
slightly
glowing
slightly
glowing
DSP has
power but
cannot start.
• Check
jumpers
P6.
• They have
to be set
as
described
in "Power"
on page
7.
• The
bootload
er cannot
start
• DSP does
not work
steady The
bootloader
started
loading the
software.
Normal
process takes
a few
seconds.
There is a
problem with
the DSP or
Flash.
8
Connections | MK 6.0 Installation Manual