PRODUCT DESCRIPTION
Third party licences
SKF Enlight Collect IMx-1 System
User Manual
Revision F
As described in 2.1.1, TLS for encrypted communications with @ptitude Observer
software requires the app to check the server security certificate when setting up the
connection. This includes verifying that the certificate is signed by an official
Certificate Authority, known to the phone. If it is not able to verify that, for example
because it is a self-signed certificate, at log in the user will be prompted to confirm if
the certificate is to be trusted, with options for Trust Just This Once, Trust Always or
Do Not Trust (No Log In).
Note that when using TLS and a trusted public Certificate Authority:
• The Address specified in the app for the Monitor connection must match the
Common Name used in the certificate. The connection must not be specified
by either an IP address or a DNS naming related, for example, to a web
service provider’s domain.
1.6 Third party licences
Some pieces of licensed software such as open source or third-party libraries have
been used when developing this product.
SKF Enlight Collect Gateway firmware version 3.4.
• For a list of these refer to the licence manifest.
SKF Enlight Collect Manager app
• A list is available on the
Support page in the app.
For any enquiries contact SKF’s
Technical Support Group.
To Next Page
Loading...
