PRODUCT SPECIFICATIONS
Quality control
SKF Enlight Collect IMx-1 System
User Manual
Revision Letter A
5.3.2 Sensor
Figure 62 Sensor labelling
There is a flat area on one face of the sensor case where the SKF product marking is
placed. Customer can place their own identification marking on the other side of the
sensor, if this is required.
5.3.3 Gateway
On the front face of the case a manufacturing data label, confirms product and
company information, CE marking, WEEE marking and RoHS compliance. The QR
code contains the product information shown alongside it. Note the QR code can be
used to identify the gateway during commissioning.
Figure 63 Gateway labelling example
A second label provides the additional radio equipment approval information and
warnings that are required to comply with those approvals.
5.4 Quality control
•
SKF Sverige AB, Luleå is ISO 9001:2015 certified.
To Next Page
Loading...
