SKF MKU Series Assembly Instructions

3
Appendix to Declaration of Incorporation in accordance with 2006/42/EC, Annex II, No. 1 B
Description of the essential health and safety requirements according to 2006/42/EC, Annex I, which have been applied and fulfilled. Any
essential health and safety requirements not listed here are not relevant to this product.
Table 1
Appendix to Declaration of Incorporation
No.:
Essential health and safety requirement
Applicable:
Fulfilled:
1.1
Principles
1.1.2
Principles of safety integration
Yes
Yes
1.1.3
Materials and products
Yes
Not
completely
fulfilled
1)
1.1.5
Design of machinery to facilitate its handling
Yes
Yes
1.1.6
Ergonomics
Yes
Not
completely
fulfilled
2)
1.2
Control systems
1.2.1
Safety and reliability of control systems
Yes
Yes
1.2.3
Starting
Yes
Yes
1.2.6
Failure of the power supply
Yes
Yes
1.3
Protection against mechanical hazards
1.3.1
Risk of loss of stability
Yes
Yes
1.3.2
Risk of break-up during operation
Yes
Yes
1.3.4
Risks due to surfaces, edges or angles
Yes
Yes
1.3.7
Risks related to moving parts
Yes
Yes
1.3.9
Risks of uncontrolled movements
Yes
Yes
1.5
Risks due to other hazards
1.5.1
Electricity supply
Yes
Yes
1.5.6
Fire
Yes
Yes
1.5.8
Noise
Yes
Yes
1.5.13
Emissions of hazardous materials and substances
Yes
Yes
1.5.15
Risk of slipping, tripping, or falling
Yes
Yes
1.6
Servicing
1.6.1
Machinery maintenance
Yes
Yes
1.6.2
Access to operating positions and servicing points
Yes
Not
completely
fulfilled
3)
1.6.4
Operator interventions
Yes
Yes
1.7
Information
1.7.1
Information and warnings on the machinery
Yes
Yes
1.7.1.1
Information and information devices
Yes
Yes
1.7.2
Warning of residual risks
Yes
Yes
1.7.3
Marking of machinery
Yes
Yes
1.7.4
Operating instructions/assembly instructions
Yes
Yes
1.7.4.1
General principles for the drafting of operating instructions/assembly instructions
Yes
Yes
1.7.4.2
Contents of the operating instructions/assembly instructions
Yes
Yes
1.7.4.3
Sales literature
Yes
Yes
1) Not completely fulfilled: Hazards due to the lubricant used must be assessed by the operator on the basis of the Safety Data Sheet
(SDS) and, if necessary, protective measures must be taken.
2) Not completely fulfilled: The operator must ensure that the pump is integrated into the higher-level machine in such a way that the
pump can be operated and filled ergonomically.
3) Not completely fulfilled: The operator must ensure that the pump is integrated into the higher-level machine in such a way that the
pump can be operated without danger.

SKF MKU Series Specifications

General

Brand	SKF
Model	MKU Series
Category	Water Pump
Language	English