SKF TMEB 2 User Manual

6 Belt alignment tool SKF TMEB 2
SAFETY RECOMMENDATIONS
• Always turn off the power of the drive machine before you start
working.
• Always read and follow the operating instructions.
• Although the laser diode in the laser unit has an output power of
less than 1 mW, never stare directly into the laser transmitter.
• Never aim the laser beam into another person's eyes.
• Opening the housing of the laser unit may result in hazardous
light exposure and voids the warranty.
• Take care not to pinch your fingers when mounting the units on
the pulley.
• The equipment should not be used in areas where there is a risk
of explosion.
• Never expose the equipment to high humidity or direct contact
with water.
• Have all repair work performed by an SKF repair shop.

SKF TMEB 2 Specifications

General

Brand	SKF
Model	TMEB 2
Category	Power Tool
Language	English