Skyjack SJ61T - Grease Drive Axle; Grease Drive Shaft

Page 224 December 2007
Telescopic Boom Series
Models SJ61T & SJ66T
194312
Section 5 - ProceduresService and Maintenance
5.10-4 Grease Drive Axle
1. Ensure aerial platform is on a rm level surface and is in stowed position.
2. Open axle cover plate and locate grease tting. (see diagram below)
3. Pump grease into the grease ttings. (Refer to the Table below)
5.10-5 Grease Drive Shaft
1. Locate the grease ttings on the drive shaft and pump grease. (Refer to the Table below)
*GREASE
Model Recommended Grease Type
SJ40T / 45T
SJ61T / 66T
Mobil Mobillux EP2
Texaco Multifax EP2
Sun Prestige 742 EP
Shell Alvania EP2
Exxon Ronex WB
* Refer to Service and Maintenance manual for greasing
frequency and procedures.
*GREASE
Model Recommended Grease Type
SJ40T / 45T
SJ61T / 66T
Mobil Mobiltac C
Texaco Crater 2X or 3X
Sun Gear Compound 407
Shell Cardium EP
Exxon Surrett Fluid 30
* Refer to Service and Maintenance manual for greasing
frequency and procedures.
Drive Axle
Grease Fitting
Grease Fitting
Grease Fitting
Grease Fitting
Grease Fitting