Skyjack SJ61T - Page 23

Telescopic Boom Series
Models SJ61T & SJ66T
194312
December 2007 Page 23
Section 1 - Scheduled Maintenance Scheduled Maintenance Inspections
1.1-12 Special Options
• Hydraulic Generator (If Equipped) (B)
- Ensure there are no loose or missing
parts with no signs of visible damage.
- Ensure all hoses are properly tightened
and there is no evidence of hydraulic
leakage.
• Battery Warmer/Hydraulic Oil Heater
(If Equipped) (B)
- Ensure battery warmer/hydraulic oil
heater cord is properly secured with no
signs of visible damage and hydraulic
leakage.
• Arctic Weather Package (If Equipped) (B)
- Ensure battery/hydraulic oil/engine oil
heater plug is properly secured with no
signs of visible damage and hydraulic
leakage.
• Welder (If Equipped) (B)
- Ensure welder and welder tray are
properly secured.
- Ensure there are no loose or missing
parts and there is no visible damage.
- Ensure there are no loose wires or
missing fasteners.
• Flashing Amber Light (If Equipped) (B)
- Ensure lamp is properly secured with no
signs of visible damage.
• Glazier Tray (If Equipped) (B)
- Ensure tray, strap, foam supports and
cover bumpers are properly secured with
no signs of visible damage.
Battery Warmer/
Hydraulic Oil Heater
Flashing Amber Light
03
Hydraulic Generator
Welder
Glazier
Tray