SMART 550 - Page 58

CHAPTER 5
USING YOUR DOCUMENT CAMERA IN PLAYBACK MODE
51 smarttech.com/kb/171225
5.
Press the button on the control panel or remote control to select the video you want to
play.
6. Press the MENU button on the control panel or remote control to stop the video or to return to
thumbnail view.
You can delete all images at once from your document camera’s memory sources using the OSD
menu, or you can delete selected images.
IMPORTANT
You are unable to delete images from your computer in Playback mode. You can delete images
only from the connected memory source.
To delete all images
1. Select the memory source you want to delete all images from.
2. Press the MENU button on the control panel or remote control to access the Playback mode
OSD menu.
3.
Press the button the control panel or remote control to navigate to DELETE ALL.
4.
Press the button on the control panel or remote control to make a selection.
The DELETE ALL warning appears.
5.
Press the and buttons on the control panel or remote control to select YES or NO.
6. Press the MENU button on the control panel or remote control to DELETE or CANCEL.
7. Press the MENU button on the control panel or remote control to close the Playback mode
OSD menu.
To delete one image
1. Press the PLAYBACK button on the control panel or remote control to display all the images in
the memory storage.
2.
Press the , , , buttons on the control panel or remote control to select the image
you want to delete.