SMART 550 - Page 57

CHAPTER 5
USING YOUR DOCUMENT CAMERA IN PLAYBACK MODE
50 smarttech.com/kb/171225
To select the settings for a slide show
1. Press the MENU button on the control panel or remote control to access the Playback mode
OSD menu.
2.
Press the button on the control panel or remote control panel to make a selection, and
then press the button.
3.
Press the and buttons on the control panel or remote control to toggle between
functions.
4.
Press the button on the control panel or remote control to toggle between functions.
5. Press the MENU button on the control panel or remote control to close the menu.
To play a slide show
1. Connect your document camera to a projector or display (see Page15).
2. Insert an SD/SDHC card.
3. Press the PLAYBACK button on the control panel or remote control.
Thumbnail images from the memory source are displayed.
4. Press the MENU button on the control panel or remote control.
5.
Press the button on the control panel or remote control twice to start the slide show.
6. Press the MENU button on the control panel or remote control to stop the slide show or to
return to thumbnail view.
To play a video
1. Connect your document camera to a projector or display (see Page15).
2. Insert an SD/SDHC card.
3. Press the PLAYBACK button on the control panel or remote control.
Thumbnail images from the memory source are displayed.
4.
Press the and buttons on the control panel or remote control to toggle between
images.