Chapter 2
Using basic features
smarttech.com/kb/171745 17
Using the remote control
Use the remote control to turn the display on or off, change the input source, control the volume, switch to
the OPS PC (if installed), and more. You can also use the remote control to open the on-screen menus and
change the display’s settings.
IMPORTANT
l Do not subject the remote control to strong shock.
l Keep the remote control away from liquids. If it gets wet, wipe it dry immediately.
l Do not expose the remote control to heat or steam.
l Do not open any part of the remote control other than the battery compartment.
The image and table below list the remote control’s functions.
No. Name Description
1 Power
l
Press to wake the display or put it back in Stanby mode.
l
Press and hold for five seconds to turn off the display.
To Next Page
Loading...
Need help?
General