Chapter 3
Using apps on the display
smarttech.com/kb/171745 37
Using EShare
You can share content wirelessly to the display from your computer or mobile device.
NOTES
l EShare is a third-party application. SMART’s support for this application may vary depending on the
inquiry.
l Make sure your computer or mobile device is connected to the same network as the display.
l Some EShare features are not available for certain mobile devices or computers.
Downloading the EShare app
For device requirements, see Device requirements on page40.
1.
On the display’s Home screen, tap the Apps menu icon .
The Apps menu appears.
2.
Tap the EShare icon .
3. In your device’s browser enter the URL specified on the display’s screen.
OR
Use a QR code scanning app on your device to scan the QRcode on the display’s screen.
4. Dowload and install the EShare app for your device.
Verifying that the display and mobile devices are connected to the same
network
1. Tap the User Guide button on the EShare app to view the network name and IP address.
If the display is connected to a wireless network, note the name of the network the display is connected
to.
If the display is connected to a wired network, note the IP v4 address, and compare the first 3 octets
(e.g. ×××.×××.×××.×××) to the IP address on the mobile device or computer.
2. On a user’s mobile device or computer, verify that the mobile device or computer is connected to the
same network and subnet.
Consult the mobile device or computer’s user guide for more information.
To Next Page
Loading...
Need help?
General