SMART Board GX Series - Page 47

Chapter 3
Using apps on the display
smarttech.com/kb/171745 47
To copy a file from the USBdrive to the display
1. Connect a USB drive to the display on the front connector panel.
2.
On the display’s Home screen, tap the Apps menu icon.
The Apps menu appears.
3.
Tap the File Manager icon.
File Manager appears.
4. Tap the name of the connected USB Drive.
5. Browse to the files you want to move.
6. Tap and hold on the file to select it.
A check box appears next to the file.
7. Tap Copy in the side menu.
8. Tap Local storage.
9. Browse to the folder you want to copy the file to.
10. Double-tap the folder to open it.
11. Tap Paste.
The file is copied to the display and remains on the USB drive.
To move a file from the display to a USB drive
1. Connect a USB drive to the display on the front connector panel.
2.
On the display’s Home screen, tap the Apps menu icon .
3.
Tap File Manager icon .
4. Tap Local storage.
5. Browse to the files you want to move.
6. Press and hold on the file to select it.
A check box appears next to the file.
7. Tap Cut in the side menu.