socomec ATyS - Atys R Accessories Available

19
EN
ATyS / ATySr - 541630C - SOCOMEC
5.4. ATySr ACCESSORIES AVAILABLE
BRIDGING BARS
To connect switch I & II load terminals together.
TERMINAL SHROUDS (125 TO 630 A)
Incoming and outgoing protection against direct
contact with the connection terminals or parts. Cannot
be mounted in the rear position at the same time as
the voltage sensing and power outlet kit or the bridging
bars. Can be mounted top or bottom, in front or in rear
position.
TERMINAL SCREENS
Incoming and outgoing protection against direct
contact with the connection terminals or parts.
DOOR ESCUTCHEON PLATE
Anaccessorytobexedontoacabinetdoortoframe
thecontrollerpartofushmountedATySrtransfer
switches.
SUPPLEMENTARY AUXILIARY CONTACT (AC)
Pre-breaking and signaling of positions I and II: 1
additionalauxiliarycontactNO/NCauxiliarycontact
in each position. Included as standard for ratings from
2000 to 3200A. For Low level AC: please consult
SOCOMEC.
KEY LOCK AUTO / MANUAL SELECTOR SWITCH
The ATySrmodeselectorswitchisdeliveredwitha
rotary handle as standard. This can be replaced with a
key lock.
Downloadkeylockassemblyinstructionsfordetails.
Ref.95991007.
RONIS KEY PADLOCKING ACCESSORIES
Locking of the electrical and manual operation by
means of a RONIS EL11AP lock. Possibility of locking
inallpositions,ifthe“Padlockinginthe3positions”
option is ordered.
Notcompatiblewithushmounting.
PADLOCKING IN 3 POSITIONS
Allows locking of the operation in the 3 positions I, 0 and II.
(Factoryttedaccessory)
DC POWER SUPPLY (DC -> AC)
Allowsastandard230VacATySrtobesuppliedthrough
a12/24VdcAuxPowersupply.Availableforratingsupto
1600A
CONTROL VOLTAGE TRANSFORMER
Allows a standard 230 V AC device to be supplied with
400VAC.
Others:
Refer to the end of this instruction manual or the latest
SOCOMEC product catalogue.
(Downloadablefromwww.socomec.com)