socomec ATyS - Padlocking Key Interlocks

30
EN
ATyS / ATySr - 541630C - SOCOMEC
6.3.9. Padlocking key interlocks
Intended for locking the electrical control and the backup control in position 0 using a RONIS EL11AP lock. As standard, key
locking is in the 0 position.
Optionallyandwhenincludingtheoption“padlockingin3positions”keylockingwillbeinpositionsI,0orII
125A TO 630A 800A TO 3200A
6.3.10. Additional auxiliary contacts
Intended for pre breaking and signaling of positions I and II:
Amaximumof2NO/NCadditionalauxiliarycontactscanbettedforeachposition.(Customerassemblymaybe
required.)
82
92
84
94
81
91
(fast-on)
Pos II
Pos I
81
81
82
84
91
92
94
Pos I
Pos II
82
84
91
92
94
2x
(1)
125 A to 630 A (Optional) 800 A to 1600 A (Optional)
2000 A to 3200 A (Standard)
(1)
WhenmountingoneauxiliarycontactonpositionIorII,usetheshortscrewsprovided.
WhenmountingtwoauxiliarycontactsonpositionIorII,usethelongscrewsprovided.