Soehnle 3035 - Page 35

35
IT data record
Select
for the format of the IT data record
• IT print format (variable)
• IT data record S20
• IT data record 2790 like rev. 2.0
• IT data record Easylog
Factory default: IT print format (variable)
Variable IT print format selection - the default setting is user-
programmable or
programmable iaw. with the interface description 470.508.090 with the
service software.
IT data record autom. <I>
Select
off or on
Factory default: off
(for On, the IT interface automatically transmits the data record
with the print
format <|> via the IT interface after each settle - requires <|> print format
layout with service software)
IT mode uni-directional
Select
for IT mode unidirectional (terminal automatically triggers the selected
data record)
• no sending of data record
• A: send data record 1 x immediately
• B: send data record 1 x weight change/settle
• C: send data record change/settle
• D: send data record change/settle/>empty
• E: send data record change/settle/<empty/>empty
• F: send data record continuously
• G: send data record 3005 continuously
• H: send data record 1 x on settle
Factory default: none
Time pattern data packets
Enter
Time spacing for data packets via interface
Enter with character keypad in ms.
Factory default: 100 ms
Decimal delimiter
Select
Comma, period, or none
Factory default: comma
Thousand delimiter
Select
Comma, period, or none
Factory default: none
Remote control lock
Select
(currently no function; implemented in later revision)
off or on
Factory default: off
IT with STX-ETX
Select
off or on
Factory default: off
Factory default
Select
Do not execute: Customized IT settings remain intact
Execute: Resets IT settings to factory defaults.