SolarEdge SE66.6KUS - Page 34

9.
ConnecttheConnectionUnitcablestotheSecondaryUnit(s)connectors:
l Communicationcabletocommunicationconnector
l
ACcabletoACconnector:
a. Positionthecablesothatthearrowsarefacingyou.
b. PlugtheACcableintotheSecondaryUnit.
c. Rotatethecableconnectorclockwisetofastenit.
Figure 22: Connecting the AC connector to a Secondary Unit
NOTE
When connecting the AC cable to the left Secondary Unit, loop the cable ( see the
following figure) to prevent pressure on the gland.
Chapter 3: Installing the Primary and Secondary Unit(s)
-Three Phase Inverter with Synergy Technology Installation MAN-01-00402-1.4
33