AA
BBOOUUTT TTHHIISS MMAANNUUAALL
This manual is divided into five main sections, and is designed to provide a comprehensive source of information
for Duality SE console users. The table of contents will help you to familiarise yourself with the basic content of each
section. If you are reading this from an electronic version of the manual, use the ‘bookmark’ feature to rapidly locate
to virtually any topic.
If you have not previously used an SSL console, you are advised to read the Duality SE overview at the start of Section
2. Those of you who have experience of SSL’s range of analogue consoles will have little difficulty getting to grips with
the operation of this console’s control surface; features that are specific to Duality SE are fully described in Section
2.
To set-up and configure the software interface between Duality SE and your chosen DAW, please study Section 3.
This section also covers the DAW functions that you can usefully control from Duality SE’s centre section.
Finally, the last section in this manual is provided to hold useful appendices that you may be supplied with from time
to time.
CCoonnvveennttiioonnss UUsseedd
Some typographical conventions have been used in this manual to help distinguish explanatory text from the text
referring to console items. They are as follows:
• Switch cap engravings on the console are usually in UPPERCASE (eg. SOLO).
• Silk screened text on the console’s control surface can be either UPPERCASE (eg. DYNAMICS), or lowercase
bold (eg. auto), or Titlecase (eg. Talkback Mix).
• Any text on the console’s TFT screen is referred to in a Bold typeface.
Items of note or cautions are shown in italic with lines above and underneath.
• Whenever this manual mentions the selection or pressing of a button, it is assumed that the button was not
active (ie. not lit), and that this action has made it active (ie. it has become lit).
• Similarly, whenever the manual mentions the deselection of a button (or pressing it again), it is assumed that
it was active before the action, and has become inactive due to this action.
CCoonnttaaccttiinngg SSoolliidd SSttaattee LLooggiicc
If you cannot find the information you need on the pages of this manual, please refer to the Duality SE support pages
at http://www.solidstatelogic.com
11--55
IInnttrroodduuccttiioonn
DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
