AAuuttoommaattiioonn SSeettuupp OOppttiioonnss
The following entries in the SSL / Misc / Setup menu are used to configure automation operations:
Glide frames: Sets the ramp time in frames for the automation SNAP mode. (range
0 - 255)
Rollback threshold frames: Sets the number of consecutive, decrementing frames that the system
needs to see to determine if a Rollback has taken place. The range is
2 - 10; the default is 2 frames. Increase as required if a Rollback occurs
when you stop the timecode master.
In Mix show: When using the automation, you have a choice of what is displayed on
the consoles channel scribble strips (and below the Group and
Master fader levels in the Centre Section TFT screen). The choices
are:
Automation Mode: displays the status of the faders – Auto, Safe or
Manual;
Channel names in Mix running: displays the channel names once
Execute is pressed in automation,
Channel names: displays the channels names regardless.
Mix Update Mode: Sets the default automation mode at the start of an update Mix
(Replay / Absolute / Trim).
Automated switches turn off on: Select whether the off function of automatable switches is sent on
the down-press or release of the button (Press / Release).
AAuuttoommaattiioonn
55--2222 DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
