SSEECCTTIIOONN 55:: AAUUTTOOMMAATTIIOONN
OOvveerrvviieeww
Duality SE’s automation system is a fully featured package, developed from SSL's renowned G and K Series Ultimation
systems, but with a feature set designed specifically for Duality SE. The classic SSL look and feel, familiar to thousands
of engineers worldwide, is utilised to add dynamic fader and switch automation to the console. MTC (MIDI Time
Code) serves as the mix timeline reference, together with support for MMC (MIDI Machine Control) locate
commands to follow non-play speed positional changes from the DAW. Mix data is saved to the internal flash memory
as part of Duality SE’s Project system, but may be backed up on your computer via the Duality SE Browser.
KKeeyy ffeeaattuurreess
• Frame accurate fader and switch automation data
• Moving and non moving fader modes
• Trim updates
• Fader links
• Cue/FX Send, EQ and Insert on/off automation
• Mix Pass history
• AutoTakeover
• Variable glide times
• Selectable Protection modes
• Match and Play switch automation updates
• Selective protection of faders and switches
The system uses the channel bay TFT screens to give a graphical display of fader levels. The centre section TFT is
used to display the levels of group faders and A, B, C bus master fader levels.
The automation system is a chargeable option for the Duality SE console, and switch automation is only enabled if
your console has the Duality SE features enabled. If your console has not been supplied with the full automation
system, please contact your local SSL representative.
AAuuttoommaattiioonn
55--11DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
