SSeettuupp MMeennuu
The centre section TFT screen provides access to a setup menu that holds a number of useful console-related items.
Select SSL followed by Misc and then Setup (see Section 3 if you are not familiar with the use of the TFT and its
associated soft keys).
To change a setting, use the left hand D-Pot to select the item, then press the D-Pot to enter adjustment mode. Turn
the D-Pot to the desired setting and press it a second time to save the setting to non-volatile memory.
The Setup options are as follows:
Automation
Glide frames: Sets the ramp time in frames for the automation SNAP mode. (range
0 - 255)
Rollback threshold frames: Sets the number of consecutive frames that the system needs to see
to determine if a Rollback has taken place. The range is 2 - 10; the
default is 2 frames. Increase as required if a Rollback occurs when
you stop the timecode master.
In Mix show: When using the automation, you have a choice of what is displayed
on the consoles channel scribble strips (and below the Group and
Master fader levels in the Centre Section TFT screen). The choices
are:
Automation Mode: displays the status of the faders – Auto, Safe or
Manual;
Channel names in Mix running: displays the channel names once
Execute is pressed in automation,
Channel names: displays the channels names regardless.
Mix Update Mode: Sets the default automation mode at the start of an update mix
(Replay / Absolute / Trim).
Automated switches turn off on**: Select whether the off function of automatable switches is sent on
the down-press or release of the button (Press / Release).
Grouping
Fader Grouping Mode: Selects the fader grouping mode (Servo / VCA). (See Group
Control Faders for more details).
Group Lockout level: Set the group master level below which slave faders cannot have their
balance altered (available in Servo grouping mode only). The lockout
level range is -35dB to -70dB or OFF.
** Only displayed if the DualitySE software features have been enabled
22--4433
CCoonnssoollee OOppeerraattiioonnss
DDuuaalliittyy SSEE OOppeerraattoorr’’ss MMaannuuaall
To Next Page
Loading...
Need help?
General
