Need help?Do you have a question about the Solinst Levelogger Series and is the answer not in the manual?
General| Protection Rating | IP68 |
|---|---|
| Model | Levelogger Series |
| Accuracy | ±0.05% FS or ±0.1% FS (depending on model) |
| Temperature Range | -20°C to +80°C |
| Material | Stainless steel |
| Diameter | 22 mm |
| Measurement Range | 0 to 10 m, 0 to 30 m, 0 to 100 m, 0 to 200 m (depending on model) |
Provides step-by-step instructions for installing the Levelogger Software.
Provides instructions on how to start and stop the datalogger, including future start/stop.
Explains how to reset the LTC Levelogger's conductivity sensor to factory settings.
Details options for downloading data and saving it into various file formats.
Guides through compensating data using Basic or Advanced options for barometric and parameter adjustments.
Explains manual barometric compensation when a dedicated Barologger is not used.
Describes installation methods: free suspended, fixed, Barologger, Rainlogger, and extreme environments.
Covers cleaning, o-ring inspection, and general maintenance of Leveloggers.
Details the Run Diagnostics function for checking Levelogger status and performance.
Provides step-by-step instructions for uploading new firmware files to a Levelogger.
Addresses common errors like 'Class not Registered' or 'DLL not found' during installation.
To Next Page
