Solinst Levelogger Series - Advanced Compensation

Levelogger Series User Guide
Page 56
8.1.2 Advanced Compensation
When you select Advanced compensation, the Data Compensation Options window will open.
Figure 8-5 Advanced Data Compensation Options
First, you will select how you want your data displayed (Manual Data Adjustment):
• Height of Water Above Sensor is the default display option. Select this option to perform a
Barometric Compensation and/or Parameter Adjustments to one or more data files, while keeping
the sensor diaphragm (zero point) as the reference point.
• Depth to Water Level adjusts water level data to represent depth to water level readings (from the
top of a well casing or other reference point) by entering a field zero, such as a manual depth to
water level measurement. Adjustments can be made to one or more data files.
• Elevation of Water Level adjusts water level data to represent elevation of water level readings
(above sea level or other reference point) by entering a measuring point elevation, and a field zero,
such as a staff gauge measurement from that point. Adjustments can be made to one or more data
files.
• Parameter Adjustments Only allows you to adjust one or more data files to different units,
elevation, etc., while keeping the sensor diaphragm (zero point) as the reference point for
Leveloggers. It also allows you to change Rainlogger data file parameters.
Note: Parameter Adjustments Only, is the only option for compensating Rainlogger data.
Next, you will select Yes or No to Barometrically Compensating the data (will not be active if you selected
Parameter Adjustments Only).
Next, you will select Yes or No to performing any Parameter Adjustments on the data files (will not be active
if you selected Parameter Adjustments Only).
Click Next, after you have selected all of your Data Compensation options.