Levelogger Series User Guide
Page 12
Barologger Edge Technical Specifications
Level Sensor: Piezoresistive Silicon with Hastelloy Sensor
Accuracy: ± 0.05 kPa
Resolution: 0.002% FS
Normalization: Automatic Temperature Compensation
Temp. Comp. Range: -10ºC to 50ºC
Temperature Sensor: Platinum Resistance Temperature Detector (RTD)
Temp. Sensor Accuracy: ± 0.05ºC
Temp. Sensor Resolution: 0.003ºC
Battery Life: 10 years (based on 1 reading/minute)
Clock Accuracy (typical): ±1 minute/year (-20ºC to 80ºC)
Operating Temperature: -20ºC to 80ºC
Maximum # Readings: 40,000 sets of readings
Memory: Continuous or Slate mode
Communication Speed: 9600 bps, 38,400 bps with USB optical reader
Com Interface: Optical Infra-red: USB, RS-232, SDI-12
Size: 22 mm x 159 mm (7/8" x 6.25")
Weight: 129 grams (4.5 oz.)
Corrosion Resistance:
Titanium based PVD coated body and superior corrosion resistant
Hastelloy sensor
Other Wetted Materials: Delrin, Viton, 316L Stainless Steel
Sampling Modes:
Linear, Event & User-Selectable Schedule with Repeat Mode,
Future Start, Future Stop, Real Time View
Measurement Rates: 0.125 second to 99 hours
1.1.7 Barologger Edge
The Barologger Edge uses algorithms based on air pressure only. It measures and logs changes in atmospheric
pressure and temperature, which are then used to compensate water level readings recorded by a Levelogger.
Note: Solinst recommends using the most recent Barologger Edge firmware version with the latest Levelogger
Software version. See Section 2.3.
Model Full Scale (FS) Accuracy Resolution
Barologger (M1.5) Air Only ±0.05 kPa 0.002% FS
For “5” series loggers, see “3001 5 Series Loggers.ai”
To Next Page
Loading...
