Solinst Levelogger Series - Table of Contents

Levelogger Series User Guide - Table of Contents
1 Introduction 5
1.1 Levelogger Series 6
1.1.1 Levelogger 5 6
1.1.2 Barologger 5 7
1.1.3 Levelogger 5 Junior 8
1.1.4 Levelogger 5 LTC 9
1.1.5 Rainlogger 5 10
1.1.6 Levelogger Edge 11
1.1.7 Barologger Edge 12
1.1.8 Levelogger Junior Edge 13
1.1.9 LTC Levelogger Edge 14
1.1.10 Rainlogger Edge 15
1.2 Measurement Parameters 16
1.2.1 Level 16
1.2.1.1 Pressure Calibration 16
1.2.2 Barometric Pressure 16
1.2.3 Temperature 17
1.2.4 Conductivity 17
1.2.4.1 Calibration of the Conductivity Sensor 17
1.2.5 Total Rainfall 17
2 Communicating with Solinst Dataloggers 18
2.1 Optical Readers 18
2.2 PC Interface Cable 21
2.3 Backwards Compatibility 22
3 System Requirements and Software Installation 23
3.1 System Requirements 23
3.2 Software Installation 23
4 Startup, Configurations and Settings 24
4.1 Startup 24
4.1.1 Software/Firmware Update Checks 24
4.1.2 Communicating with a USB Port 24
4.1.2.1 HID-Compliant USB Devices 24
4.1.2.2 Older Style USB Devices 25
4.2 Configuration and Settings 26
4.2.1 Data Directory 26
4.2.2 File Name Settings 26
4.2.3 Default File Type 26
5 Levelogger Series Setup 27
5.1 Datalogger Settings 28
5.1.1 Setting Up Channel Information 29
5.1.1.1 Level Channel (Ch1) 29
5.1.1.2 Temperature Channel (Ch2) 29
5.1.1.3 Conductivity Channel (Ch3) 30
5.1.1.4 Rainloggers 31
5.2 Datalogger Information 32
5.3 Datalogger Memory 32
5.4 Datalogger Time 32
5.5 Datalogger Sampling Mode 33
5.6 Datalogger Memory Mode 34
5.7 Saving and Retrieving Levelogger Settings Files 35
5.8 Starting and Stopping the Datalogger 36