Solinst Levelogger Series - Backwards Compatibility

Levelogger Series User Guide
Page 22
2.3 Backwards Compatibility
The Levelogger 5 Series is not backwards compatible with previous versions of Levelogger Software. Only
Levelogger Software Version 4.5 and up can be used to program the Levelogger 5, Barologger 5, Levelogger
5 Junior, Levelogger 5 LTC, and the Rainlogger 5.
Note: It is always recommended to use the most recent version of software and firmware.
Let Solinst keep you up-to-date with each new software and firmware release. Register your software at:
www.solinst.com/Registration/ to receive these updates.
Only Levelogger Software Version 4 and up can be used to program the Levelogger Edge and Barologger
Edge. The Levelogger Junior Edge is only compatible with Levelogger Software Version 4.0.2 and up. The
Rainlogger Edge is only compatible with Software Version 4.1.0 and up. The LTC Levelogger Edge is only
compatible with 4.3.0 and up.
The Levelogger Gold, Barologger Gold, Levelogger Junior, LTC Levelogger Junior, and Rainlogger are also
compatible with Version 4.5 Software, and previous versions.
To use your Leveloggers with Version 4.5 Software, ensure your firmware is upgraded to the following
versions:
Datalogger Firmware Version
Levelogger 5 1.000
Barologger 5 1.000
Levelogger 5 Junior 1.000
Levelogger 5 LTC 1.000
Rainlogger 5 1.000
Levelogger Edge 3.004
Barologger Edge 3.004
Levelogger Junior Edge 3.004
LTC Levelogger Edge 1.003
Rainlogger Edge 3.001
Levelogger Gold 2.007
Barologger Gold 2.007
Levelogger Junior 2.007
LTC Levelogger Junior 2.005
Rainlogger 2.000
For more information on previous software and firmware versions, visit www.solinst.com to view
3001 Levelogger Series: Hardware Compatibility, located on the Downloads page.