Levelogger Series - Troubleshooting Guide
Page 86
‘The selected file is not a barometer’
Select a Barologger for the compensation process.
‘Data Corrupted’
Contact Solinst for assistance. Use Levelogger Diagnostic Utility to do a memory dump and sent the dump
file to Solinst for further analysis.
‘Internal Error’
Contact Solinst for assistance.
‘Fail to append data – A different Levelogger has been detected!’ or ‘Fail to append data – A different
start time has been detected!’ or ‘Fail to append data – New data is not available in the Levelogger!’
The Levelogger software can only append data to a file that has the same serial number and start time as the
connected Levelogger. Find the correct file, or use ‘All Data’ to download the complete file.
‘Only Levelogger 5/Edge/Gold supports this function’
The ‘Append Data’, ‘Partial Download’ and ‘Download Files/Data Recovery’ functions are only supported
by the Levelogger 5/Edge/Gold loggers, not previous version Leveloggers.
‘Schedule cannot be empty’
When using the ‘Schedule’ sampling option, the schedule must contain at least one item.
‘Readings in schedule exceed the maximum’
The number of readings in a schedule should not result in more than 150,000 individual readings.
To Next Page
Loading...
