C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
ILCE-9
d-830-100-11 (1)
GB
101
Shooting
Program Auto
Allows you to shoot with the exposure adjusted automatically (both the
shutter speed and the aperture value).
You can set shooting functions such as [ISO].
1
Set the mode dial to (Program Auto).
2
Set the shooting functions to your desired settings.
3
Adjust the focus and shoot the subject.
Program Shift
When you are not using a flash, you can change the shutter speed
and aperture (F-value) combination without changing the appropriate
exposure set by the camera.
Turn the front/rear dial to select the aperture value and shutter speed
combination.
• “P” on the screen changes to “P
” when you turn the front/rear dial.
• To cancel program shift, set the shooting mode to other than
[Program Auto], or turn off the camera.
Note
• According to the brightness of the environment, the program shift may not
be used.
• Set the shooting mode to another one than “P” or turn off the power to cancel
the setting you made.
• When the brightness changes, the aperture (F-value) and shutter speed also
change while maintaining the shift amount.
To Next Page
Loading...
