Sony a9 - Using Network Functions; Using the Wi-Fi;One-Touch (Nfc);Bluetooth;Wired LAN Functions; Installing Imaging Edge Mobile

C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\070WRL.indd
2019/02/19 10:01
ILCE-9
d-830-100-11 (1)
Using network functions
GB
193
Using network functions
Using network functions
Using the Wi-Fi/One-touch (NFC)/
Bluetooth/wired LAN functions
You can perform the following operations using the camera’s Wi-Fi, NFC
One-touch, and Bluetooth functions.
• Saving images to a computer
• Transferring images from the camera to a smartphone
• Using a smartphone as a remote control for the camera
• Viewing still images on a TV
• Recording location information from a smartphone to images
For details, refer to the “Help Guide” (page 2).
Installing Imaging Edge Mobile
Imaging Edge Mobile is required to connect the camera and a
smartphone. If Imaging Edge Mobile is already installed on your
smartphone, be sure to update it to the latest version.
For details on Imaging Edge Mobile, refer to the support page
(https://www.sony.net/iem/).
Note
• To use the camera’s NFC One-touch function, an NFC-enabled smartphone or
tablet is required.
• The Wi-Fi functions introduced in this manual are not guaranteed to operate
on all smartphones or tablets.
• The Wi-Fi functions of this camera are not available when connected to a
public wireless LAN.
• Depending on future version upgrades, the operational procedures or screen
displays are subject to change without notice.