Sony a9 - Manual Exposure

ILCE-9
d-830-100-11 (1)
C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
GB
104
Manual Exposure
You can shoot with the desired exposure setting by adjusting both the
shutter speed and aperture.
1
Set the mode dial to (Manual Exposure).
2
Select the desired aperture value by turning the front dial.
Select the desired shutter speed by turning the rear dial.
• You can change the setting of the front/rear dial using MENU 
(Camera Settings 2)  [Dial Setup].
• You can also set [ISO] to [ISO AUTO] in manual exposure mode. The
ISO value automatically changes to achieve the appropriate exposure
using the aperture value and shutter speed you have set.
• When [ISO] is set to [ISO AUTO], the ISO value indicator will blink if
the value you have set is not suitable for appropriate exposure. If this
happens, change the shutter speed or aperture value.
• When [ISO] is set to other than [ISO AUTO], use MM (Metered
Manual)* to check the exposure value.
Toward +: Images become brighter.
Toward -: Images become darker.
0: Appropriate exposure analyzed by the product.
* Indicates under/over for appropriate exposure. It is displayed using
a numerical value on the monitor and with a metering indicator on
the viewfinder.
3
Adjust the focus and shoot the subject.
Hint
• You can change the shutter speed and aperture (F-value) combination
without changing the set exposure value by rotating the front/rear dial while
pressing the AEL button. (Manual shift)