ILCE-9
d-830-100-11 (1)
C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\060SET.indd
2019/02/19 10:01
GB
190
PC Remote Settings
Still Img. Save Dest.
Sets whether to save still images stored in both the camera and the
computer during PC Remote shooting. This setting is useful when you
want to check recorded images on the camera without leaving the
camera.
* PC Remote: Uses Imaging Edge (page202) to control this product from the
computer, including such functions as shooting and storing images on the
computer.
MENU (Setup) [PC Remote Settings]
[Still Img. Save Dest.] desired setting.
PC Only: Saves still images only on the computer.
PC + Camera: Saves still images on the computer and the camera.
Camera Only: Saves still images only on the camera.
Note
• If you insert a memory card that is not recordable, you cannot shoot still
images even if you select [Camera Only] or [PC + Camera].
• If you select [Camera Only] or [PC + Camera] and you have not inserted
a memory card into the camera, you cannot release the shutter even if
[Release w/o Card] is set to [Enable].
• While you are playing back still images on the camera, you cannot shoot
using PC Remote.
• The settings for [PC Remote Settings] are also applied when performing PC
remote shooting using [PC Remote (Wired LAN)] (page214).
To Next Page
Loading...
