ILCE-9
d-830-100-11 (1)
C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
GB
112
Note
• [Metering Mode] is locked to [Multi] in the following shooting modes:
– [Intelligent Auto]
– Other zoom functions than the optical zoom
• In [Highlight] mode, the subject may be dark if a brighter part exists on the
screen.
Spot Metering Point
Sets whether to coordinate the spot metering position with the focus area
when [Focus Area] is set to [Flexible Spot] or [Expand Flexible Spot].
MENU (Camera Settings 1) [Spot Metering Point]
desired setting.
Center: The spot metering position does not coordinate with the focus
area, but always meters brightness at the center.
Focus Point Link: The spot metering position coordinates with the focus
area.
Note
• When [Focus Area] is set to other than [Flexible Spot] or
[Expand Flexible Spot], the spot metering position is locked to the center.
• When [Focus Area] is set to [Tracking: Flexible Spot] or
[Tracking: Expand Flexible Spot], the spot metering position coordinates to
the tracking start position, but does not coordinate with the tracking of the
subject.
To Next Page
Loading...
