Sony a9 - Registering the Current Focus Area ( AF Area Registration)

C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
ILCE-9
d-830-100-11 (1)
GB
61
Shooting
Setting the start position to track by touch operation
([Touch Tracking] under [Func. of Touch Operation])
You can set the subject to track by touching it on the monitor (page92).
• This function is available in still image shooting mode and movie
shooting mode.
• This function is available when [Focus Mode] is set to [Single-shot AF],
[Continuous AF], or [DMF].
Changing the setting for [Focus Area] to [Tracking]
temporarily ([Tracking On] under [ Custom Key])
Even [Focus Area] is set to other than [Tracking], you can temporarily
change the setting for [Focus Area] to [Tracking] while pressing and
holding the key to which you have assigned [Tracking On] function.
• Assign the [Tracking On] function to a desired key using
[
Custom Key] in advance (page25).
• This function is available in still image shooting mode.
• This function is available when [Focus Mode] is set to [Continuous AF].
Registering the current focus area ( AF Area Registration)
You can move the focusing frame to a preassigned position temporarily
using a custom key. This function is useful when shooting scenes in which
the subject’s movements are predictable; for example, sports scenes.
With this function, you can switch the focus area quickly according to the
situation.
How to register a focus area

MENU  (Camera Settings 1)  [ AF Area Registration]
 [On].

Set the focus area to the desired position and then hold
down the Fn(Function) button.