ILCE-9
d-830-100-11 (1)
C:\d830100111\d830100111ILCE9UC2\01GB-ILCE9UC2\030BAS.indd
2019/02/19 10:01
GB
62
How to call up the registered focus area
MENU (Camera Settings 2) [ Custom Key]
desired key, then select [Regist. AF Area hold].
Set the camera to the shooting mode, hold down the key
to which [Regist. AF Area hold] has been assigned and
then press the shutter button to shoot images.
Hint
• When a focusing frame is registered using [ AF Area Registration], the
registered focusing frame flashes on the monitor.
• If you assign [Regist AF Area tggle] to a custom key, you can use the
registered focusing frame without holding down the key.
• If [Reg. AF Area + AF On] is assigned to a custom key, auto focusing using the
registered focusing frame is performed when the key is pressed.
Note
• A focus area cannot be registered in the following situations:
– The mode dial is set to either
(Movie) or
– While [Touch Focus] is being performed
– While using the digital zoom function
– While [Touch Tracking] is being performed
– While focusing
– While performing focus lock
• You cannot call up the registered focus area in the following situations:
– The mode dial is set to either
(Auto Mode), (Movie) or
• When [ AF Area Registration] is set to [On], the [Lock Operation Parts]
setting is locked to [Unlock].
To Next Page
Loading...
