Help Guide
Color Video Camera
BRC-AM7
Registering a File Transfer Destination
You can register a transfer destination server before starting a file transfer.
Select [Network] – [File Transfer] – [Default Upload Server] – [Server Settings1] (or [Server Settings2], [Server
Settings3]) in the web menu.
Hint
The name of the selection option will change according to [Display Name] configured in the next step.
1
Configure the following items for [Network] – [FTP Server 1] to [FTP Server 3] in the web menu.
2
Item Description
[Display Name]
Enter the name of the server to display in the transfer job list when selecting a transfer
destination server.
[Service]
Displays the server type.
[FTP]: FTP server
[Host Name] Enter the address or host name of the server.
[Port] Enter the port number of the server to connect.
[User Name] Enter the user name.
[Password] Enter the password.
[Passive Mode] Turn passive mode on/off.
[Destination
Directory]
Enter the name of the directory on the destination server.
Note
If characters that are invalid on the destination server are entered in [Destination Directory], files will
be transferred to the user’s home directory. Invalid characters will vary depending on the server.
[Using Secure
Protocol]
Set whether to perform secure FTP transfer.
[Root Certificate]
Load/clear a certificate.
[Load]: Load a CA certificate. Loads PEM-format certificates.
[Clear]: Clear the CA certificate.
[None]: Do not load or clear a certificate.
Note
Set the clock of the unit to the correct time before loading a CA certificate.
When recording in 3840×2160P 59.94/50P, [Load] cannot be selected.
[Root Certificate Status]: Displays the load status of the certificate.
[Reset]: Resets the [Server Settings] settings to the default values.
To Next Page
Loading...
