EasyManua.ls Logo

Sony BRC-AM7 - Power Supply

Sony BRC-AM7
471 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
recommended that you set a password with a sufficiently long character string that is hard to guess by others, and that
you store it safely.
When connecting this product to a network, connect via a system that provides a protection function, such as a router or
firewall. If connected without such protection, security issues may occur.
Power supply
The unit is not equipped with a power switch. To turn off the unit, check that all operations have ended and the unit is in
power standby state, then disconnect the power cable. When using PoE++ power delivery, disconnect the LAN cable.
Where possible, use a power source from a place where it is easy to insert and remove the power plug.
If you use an outlet in a dusty place, clean the area around the outlet regularly to prevent tracking.
Disconnect the power supply when not in use.
Precautions for moving parts
Make sure that foreign matter does not enter moving parts.
Do not apply an excessive load when moving parts by hand. Doing so may cause a malfunction.
Do not interfere with the operation of moving parts during movement. Doing so may cause an injury or malfunction.
Moving parts may not operate normally if the unit is not used for an extended period of time. Regularly operate the pan/tilt
functions of the unit.
Precautions for continuous operation
The unit can be powered 24 hours per day, 365 days per year (power standby state).
Always perform a shooting test and verify that the unit operates normally.
Shooting continuously for periods in excess of 24 hours is not guaranteed.
If shooting for longer than 24 hours, place the unit in power standby state and then restart the unit.
Note that Sony will not be liable for compensation of any kind for the content of images if you are unable to shoot due to
any malfunction while using this unit.
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD
PARTIES.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO
THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.
Precautions for the recording function
Always make a test recording, and verify that it was recorded successfully. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS RECORDING MEDIA OR ANY OTHER MEDIA OR STORAGE SYSTEMS TO RECORD
CONTENT OF ANY TYPE.
Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO, COMPENSATION OR REIMBURSEMENT ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS DUE TO FAILURE OF THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER.
SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR MADE BY THIRD
PARTIES.
SONY WILL NOT BE LIABLE FOR THE LOSS, REPAIR, OR REPRODUCTION OF ANY DATA RECORDED ON THE
INTERNAL STORAGE SYSTEM, RECORDING MEDIA OR ANY OTHER MEDIA OR STORAGE SYSTEMS.
SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO
THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND.
TP1001804715
5-065-326-11(1) Copyright 2024 Sony Corporation
435

Table of Contents

Related product manuals