Note
You cannot switch the system frequency during recording or playback.
Setting the codec
You can set the codec for recording.
Switch using [Project] – [Rec Format] – [Codec] in the web menu or camera menu.
Note
You cannot switch the codec during recording or playback.
Setting the video format
You can set the video format for recording and the output format for output from the camera.
Switch the video format for recording using [Project] – [Rec Format] – [Video Format] in the web menu or camera menu.
Switch the output format from the SDI OUT and HDMI OUT connectors using [Monitoring] – [Output Format] in the web
menu or camera menu.
Note
You cannot switch the video format during recording or playback.
Restrictions may apply to the SDI/HDMI/Stream signals, depending on the video format setting.
Setting the bit rate
You can set the bit rate for recording.
Switch using [Project] – [Rec Format] – [Quality] in the web menu or camera menu.
Note
You cannot switch the bit rate during recording or playback.
Related Topic
Look Overview
Shooting with Look Adjustment in Post-Production
TP1001804480
5-065-326-11(1) Copyright 2024 Sony Corporation
To Next Page
Loading...
