Help Guide
Color Video Camera
BRC-AM7
Shooting with Look Adjustment in Post-Production
By using the unit in log shooting mode
*1
and recording gradations evenly from dark areas to bright areas, you can make fine
adjustments, such as locally restoring the gradations of dark areas and bright areas, in post-production.
However, when viewing the recorded images on a conventional monitor, the overall contrast will appear low, making focus
and exposure adjustments difficult.
You can apply a LUT to the monitor target on the unit to assist various adjustments during shooting. You can also apply the
LUT used when shooting automatically upon playback to quickly check the finished result.
LUTs are applied by the following systems. However, only one LUT can be applied.
SDI1 output
SDI2 output/HDMI output and streaming
Proxy clip recorded on recording media
High-res (main) clip recorded on recording media
TP1001804563
5-065-326-11(1) Copyright 2024 Sony Corporation
Generic term for Flexible ISO mode/Cine EI mode/Cine EI Quick mode. The unit supports Flexible ISO mode.
*1
To Next Page
Loading...
