Help Guide
Color Video Camera
BRC-AM7
Usage Precautions
Privacy notification
The tracking function of the camera uses AI and facial recognition technology to automatically identify subjects and control
the pan, tilt, and zoom functions to keep the subject in the image. This function processes facial “biometric” data of subjects
selected as the tracking targets by the user. This recognition data is stored within the camera for a fixed interval and is not
sent to Sony. No other captured skeletal or facial information is stored within the camera. This recognition data can be
deleted by turning the camera off, putting it into standby state, or stopping the tracking function.
By using this camera function, you agree that you are responsible for the collection and use of images and data of subjects in
accordance with applicable data protection laws. It is recommended that you inform subjects of the tracking and facial
recognition technology used by this camera before shooting. If you have any queries, contact Sony Customer Support.
Usage notes
When shooting using this camera, respect the privacy of others and comply with all local privacy laws, regulations, and
moral standards for the locations where you are shooting.
Do not use this camera for any illegal or improper purpose.
Do not use this camera to defame, abuse, harass, stalk, threaten, or violate the legal rights of others, including rights of
privacy and publicity.
This camera is not intended for military or law enforcement applications.
Precautions when transporting and packing
Disconnect all connected cables and transport/package the unit in such a way that does not subject it to strong vibrations or
shocks.
Condensation
If the unit is suddenly taken from a cold to a warm location, or if ambient temperature suddenly rises, moisture may form on
the outer surface of the unit and/or inside of the unit. This is known as condensation. If condensation occurs, turn off the unit
and wait until the condensation clears before operating the unit. Operating the unit while condensation is present may
damage the unit.
Camera CMOS image sensor phenomena
Note
The following phenomena that may occur in images are specific to image sensors. They do not indicate a malfunction.
White flecks
Although the image sensors are produced with high-precision technologies, fine white flecks may be generated on the
screen in rare cases, caused by cosmic rays, etc.
This is related to the principle of image sensors and is not a malfunction. Execute APR regularly.
The white flecks especially tend to be seen in the following cases:
When operating at a high environmental temperature
When you have raised the gain (sensitivity)
Flicker
If shooting under lighting produced by fluorescent lights, sodium lamps, mercury-vapor lamps, or LEDs, the screen may
flicker or colors may vary.
Lens and pan/tilt drive units
If the lens and pan/tilt drive mechanism is not operated for an extended period, the viscosity of the grease applied inside may
increase, preventing the mechanism from moving. Operate the lens and pan/tilt mechanism regularly.
To Next Page
Loading...
