You can copy clips to another memory card.
Clips are copied to the destination memory card with the same clip names.
Select [Thumbnail] – [Copy Clip] – [Select Clip] or [All Clips] in the camera menu.
[Select Clip]: Copies the selected clip. Multiple clip selection is supported.
[All Clips]: Copies all clips on the same memory card to another memory card.
Note
If a clip with the same name already exists on the copy destination memory card, the clip will be copied with a name formed by
incrementing the number portion of the original clip name.
Example: ABCD0002 → ABCD0003
A message appears if the remaining capacity of the copy destination memory card is insufficient. Replace the copy destination
memory card.
When copying a memory card on which multiple clips are recorded, it may not be possible to copy all clips even if the capacities of the
memory cards are the same, depending on the usage conditions and memory characteristics.
To change the information displayed on the thumbnail screen
You can change the clip/frame information displayed below the thumbnail.
Select [Thumbnail] – [Customize View] – [Thumbnail Caption] in the camera menu and select the information to display.
[Date Time]: Displays the date and time the clip was created and last modified.
[Time Code]: Displays the timecode.
[Duration]: Displays the duration of the clip.
[Sequential Number]: Displays a sequential number on each thumbnail.
TP1001804582
5-065-326-11(1) Copyright 2024 Sony Corporation
To Next Page
