EasyManua.ls Logo

Sony BRC-AM7 - Page 324

Sony BRC-AM7
471 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Help Guide
Color Video Camera
BRC-AM7
[Audio Input]
Sets audio input settings.
Item Sub-item setting
Factory
default
Description
[AUDIO IN 1
Select]
[MIC] / [LINE] [MIC]
Selects the type of device connected to the AUDIO IN 1
connector.
[AUDIO IN 2
Select]
[MIC] / [LINE] [MIC]
Selects the type of device connected to the AUDIO IN 2
connector.
[AUDIO IN 1
MIC +48V]
[On] / [Off] [Off]
Displays the enable/disable state of the +48 V phantom power
supply of the device connected to the AUDIO IN 1 connector.
[AUDIO IN 2
MIC +48V]
[On] / [Off] [Off]
Displays the enable/disable state of the +48 V phantom power
supply of the device connected to the AUDIO IN 2 connector.
[CH1 Input
Select]
[AUDIO IN 1] / [MIC
(L)]
[AUDIO IN
1]
Switches the input source for recording on channel 1.
[CH2 Input
Select]
[AUDIO IN 1] / [AUDIO
IN 2] / [MIC (R)]
[AUDIO IN
2]
Switches the input source for recording on channel 2.
[CH3 Input
Select]
[Off] / [AUDIO IN 1] /
[MIC (L)]
[AUDIO IN
1]
Switches the input source for recording on channel 3.
[CH4 Input
Select]
[Off] / [AUDIO IN 1] /
[AUDIO IN 2] / [MIC
(R)]
[AUDIO IN
2]
Switches the input source for recording on channel 4.
[AUDIO IN CH1
MIC Ref.]
−80dB / −70dB /
−60dB / −50dB /
−40dB / −30dB
−50dB
Sets the reference recording level for XLR microphone input
from AUDIO IN CH1.
[AUDIO IN CH2
MIC Ref.]
−80dB / −70dB /
−60dB / −50dB /
−40dB / −30dB
−50dB
Sets the reference recording level for XLR microphone input
from AUDIO IN CH2.
[Line Input
Reference]
+4dB / 0dB / −3dB /
EBUL
+4dB
Selects the reference input level when [AUDIO IN 1 Select] or
[AUDIO IN 2 Select] is set to [LINE].
[Reference
Level]
−20dB / −18dB /
−16dB / −12dB /
[EBUL]
−20dB Selects the recording level of the 1 kHz reference tone signal.
[CH1 Wind
Filter]
[On] / [Off] [Off]
Enables/disables the wind reduction filter for channel 1
recording.
[CH2 Wind
Filter]
[On] / [Off] [Off]
Enables/disables the wind reduction filter for channel 2
recording.
[CH3 Wind
Filter]
[On] / [Off] [Off]
Enables/disables the wind reduction filter for channel 3
recording.
324

Table of Contents