Help Guide
Color Video Camera
BRC-AM7
[RCP/MSU]
Configures setting when an RCP/MSU (option) is connected.
For details, see “Connecting an RCP/MSU (option).”
Note
Configure settings on the RCP/MSU as required.
An MSU is required for a multi-camera system.
When using multiple MSU units, set one MSU unit as the master and set all other MSU units as clients.
TP1001804678
5-065-326-11(1) Copyright 2024 Sony Corporation
Item Sub-item setting
Factory
default
Description
[CNS Mode]
[Off] / [Bridge] / [MCS] /
[PC Control]
[Off] Sets the connection mode for the RCP/MSU.
[Master IP
Address]
IPv4 address 0.0.0.0
Sets the IP address of the master device when building a
LAN-based multi-camera system.
[Camera No.]
Enter a camera number
(1 to 96).
1
Sets a unique camera number within the system when
building a LAN-based multi-camera system.
To Next Page
