Help Guide
Color Video Camera
BRC-AM7
[Stream]
Sets streaming settings (see “About Streaming”).
[Stream Setting]
Sets settings related to the streaming protocol.
Note
To use RTMP, set [Stream] – [Audio Stream] – [Setting] to [On] beforehand.
[RTSP]
The following items are displayed when [Stream Setting] is set to [RTSP].
Sets settings related to RTSP streaming.
[RTMP]
The following items are displayed when [Stream Setting] is set to [RTMP].
Sets settings related to RTMP streaming.
Item Sub-item setting
Factory
default
Description
[Setting]
[RTSP] / [RTMP] / [SRT-Caller] / [SRT-Listener] / [NDI|HX] /
[Off]
[RTSP]
Selects the streaming
protocol.
Item
Sub-item
setting
Factory
default
Description
[Port Number]
554, 1024 to
65534
554 Sets the RTSP port number.
[Time Out] 0 to 600 60
Sets the timeout of the Keep Alive command for RTSP
streaming.
[Authentication]
[On] / [Off] [On] Turns the RTSP authentication function on/off.
[Video Port Number
1]
1024 to 65534 51000
Sets the port number for sending video 1 for RTSP unicast
streaming.
[Video Port Number
2]
1024 to 65534 53000
Sets the port number for sending video 2 for RTSP unicast
streaming.
[Audio Port Number] 1024 to 65534 57000
Sets the port number for sending audio for RTSP unicast
streaming.
Item
Sub-item
setting
Factory
default
Description
[Server URL] – – Sets the RTMP or RTMPS connection destination URL.
[Stream Key] – – Sets the stream key obtained from the RTMP server side.
To Next Page
