Sony MVS-6000 - Page 104

104
Transitions
Chapter 3 Signal Selection and Transitions
Note
This transition type is not available for an independent key transition.
Super mix
In this dissolve, the current video is maintained at 100% output for the first half
of the transition as the new video is mixed while increasing progressively to
100%, then the current video is progressively reduced from 100% to zero in the
second half with the new video maintained at 100% output.
For details on super mix settings, see page 115.
Note
This transition type is not available for an independent key transition.
Preset color mix
This is a two-stage dissolve, comprising two transitions, the first a dissolve to
a color matte, and the second from the color matte to the new video.
In the first transition, the current video is replaced by the color matte in a mix
(dissolve), then in the second transition the color matte is replaced by the new
video also in a mix (dissolve).
For details on color matte settings, see page 116.
Note
This transition type is not available for an independent key transition.
Wipe
A wipe replaces the current video by the new video according to a
predetermined pattern. This transition type can also be selected for an
independent key transition.
For details, see “Wipes” (page 23) and Chapter 5 “Wipes” (page 199).
DME wipe
Using a DME effect, it is possible to obtain a transition to a new image from
the current image, as in a wipe. You can also use this transition type as an
independent key transition.
For details, see “DME Wipes” (page 23) and Chapter 6 “DME Wipes” (page
221).