Sony MVS-6000 - Basic Independent Key Transition Operations; Setting the Independent Key Transition Type by a Menu Operation

136
Independent Key Transitions
Chapter 3 Signal Selection and Transitions
Basic Independent Key Transition Operations
Transition control block
You can set independent transitions for the keyers on the M/E or PGM/PST
bank.
To execute an independent key transition, press the appropriate button in the
independent key/downstream key transition execution section of the transition
control block.
The color with which buttons are lit shows the status, as follows.
Lit green: During a transition
Lit amber: Key inserted
Lit red: Key inserted into final output video
Not lit: Key not inserted
To select the transition type and set the transition rate, use a menu operation.
Note
In an independent key transition, the pattern limit function is not available.
Setting the Independent Key Transition Type by a Menu
Operation
You can also select the required independent key transition type by a menu
operation.
BKGD KEY1 KEY2 KEY3 KEY4
KEY
PRIOR
MIX
ALL
PST
COLOR
MIX
NAM
WIPE
SUPER
MIX
DME
PRIOR
SET
NORM
NORM
/REV
REV
TRANS
PVW
PTN
LIMIT
LIMIT
SET
KF
AUTO
TRANS
CUT
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
DSK1
TRANS
DSK2
TRANS
DSK3
TRANS
DSK4
TRANS
Independent key/downstream key transition execution section