191Resizer
Chapter 4 Keys
Resizer Interpolation Settings
For example, to make the interpolation settings for key 1 of the M/E-1 bank,
use the following procedure.
1
In the M/E-1 >Key1 >Processed Key menu, press [Resizer], turning it on.
This enables the resizer function.
2
Press [Resizer Process].
The Resizer Process menu appears.
3
In the <Video Field/Frame Mode> and other groups, make the
interpolation settings.
Note
These settings are the same as those for input video signals. For details,
see “Interpolation Settings” in Chapter 11 (Volume 2).
However, the following points are different.
• The signal formats allowing interpolation processing are: 480i/59.94,
576i/50, 1080i/59.94, 1080i/50, and 1080i/60.
• It is not possible to set [Interpolation Mode].
Resizer Crop/Border Settings
Making a crop setting for a key for which resizer is on
For example, to make the crop settings for key 1 of the M/E-1 bank, use the
following procedure.
1
In the M/E-1 >Key1 >Processed Key menu, press [Resizer], turning it on.
This enables the resizer function.
2
Press [Border/Crop].
The Border/Crop menu appears.
3
Press [Crop], turning it on.
This enables the adjustment of crop.
To Next Page
Loading...
