51Names and Functions of Parts of the Control Panel
Chapter 2 Menus and Control Panel
d User preference buttons
These recall the functions or menus
assigned to them in the Setup menu.
In the default setup, nothing is assigned to
the [PREFS 1] to [PREFS 8] buttons.
It is also possible to change the assignment
of these buttons in setup.
For details, see “Overall Control Panel
Settings (Config Menu)” in Chapter 19
(Volume 3).
Memory Card/USB Adaptor Block
a Memory card slot
This slot accepts a PCMCIA Type II
compliant memory card. You can use it in
software installation, and for saving and
reading in data, such as snapshot, keyframe,
effect, and setup data.
b DEVICE connectors
This is a USB connector.
You can connect a device such as a mouse,
keyboard, USB storage, and so on, that is
equipped with a USB interface to any of
these connectors.
For details on the devices that can be
connected, consult your Sony
representative.
c Memory card access indicator
This indicator lights when the memory card
is accessed for reading or writing.
Note
When the indicator is lit, do not take out the
memory card.
1 Memory card slot
2 DEVICE connector
3 Memory card access indicator
To Next Page
Loading...
