212
Basic Procedure for Wipe Settings
Chapter 5 Wipes
The Main Modify menu appears.
2
Press the [Multi] button, turning it on.
3
Set the following parameters.
Wipe Modify Clear
Press [Default Recall] at the lower left of the menu display, turning it on, then
press VF5 ‘Wipe’ to return the wipe settings to their initial status.
For details of the menu operation to return the wipe state to that set in initial
status, see “Returning to default state in function groupings” (page 78).
Knob Parameter Adjustment Setting values
1 H Multi Number of repetitions of pattern
horizontally
1 to 63
2 V Multi Number of repetitions of pattern
vertically
1 to 63
3 Invert Type Replication layout 1 to 4
To Next Page
Loading...
